ÖLFLEX® CLASSIC 100 450/750 VColour-coded PVC power and control cableÖLFLEX® CLASSIC 100 - flexible PVC cable, colour coded, power and control cable for various applications, 450/750V, also for YSLY or YYCPR: Article number choice under www.lappkabel.dkFor nominal voltage U0/U: 300/500V and conductor cross-sections below 2,5mm² see ÖLFLEX® CLASSIC 100 300/500VHigh electrical performance due to 4 kV test voltageHigh flexibility due to short-twisted conductor layersPlant engineeringIndustrial machineryHeating and air-conditioning systemsPower stationsDry or damp rooms that are subject to medium mechanical loadsFor fixed installation as well as occasional flexing at free, non-continuously recurring movement without tensile loadSuitable for torsional applications which are typical for the loop in wind turbine generators (WTG)Flame-retardant according IEC 60332-1-2Good chemical resistance.Based on IEC 60227-5 and EN 50525-2-51Fine-wire strand made of bare copper wiresPVC insulation LAPP P8/1Cores twisted in layersPVC outer sheath, grey (similar RAL 7001) Core identification code: Up to 5 cores: colour-coded according to VDE 0293-308.From 6 cores: ÖLFLEX® colour code.Conductor stranding: Fine wire according to VDE 0295, class 5/IEC 60228 class 5Torsion movement in WTG: TW-0 & TW-1.Minimum bending radius: Occasional flexing: 15 x outer diameterFixed installation: 4 x outer diameterNominal voltage: U0/U: 450/750 VACIn protected and fixed installations:U0/U: 600/1000 VTest voltage: 4000 VProtective conductor: G = with GN-YE protective conductorX = without protective conductorTemperature range: Occasional flexing: -5°C to +70°CFixed installation: -40°C to +80°C